CR-7 Large Top Dresser, Material Handler
Unload 4 cubic yards in as little as 30 seconds. The swivel kit locks in any position or can be moved 180 degrees by hand. Cross conveyor with 180 degrees swivel action allows you to place material where you want it. Light, medium, heavy and up to 20 ft to 40 ft wide with WideSpin technology. Bring your CR-10 on the course for easy and efficient topdresser loading. Patented 3-position switch gives you full control of the CR-10 and individual attachments. WideSpin technology with 0-15 degrees adjustable spinner angles broadcast from 20 ft to 40 ft. Attachment flow control gives greater flexibility over topdressing applications and material placement.

CR-10 Large Area Topdresser & Material Handler

Promo

For renovation, construction and daily maintenance: Upgrade the primary features of your course, from greens to sand traps, and improve your secondary features like bunkers, cart paths and the rough. The Turfco CR-10 has you covered.

Spread virtually any wet or dry material, including sand, lime, compost, stone, wood chips, soil conditioners and grass clippings. The CR-10's large capacity hopper and patented WideSpin™ technology, with 0-15-degree adjustable spinner angles, make it the ideal solution for a wide range of projects. Combined with a three-year warranty, the CR-10 could be the most efficient, effective piece of equipment on your course.

  • The only fairway topdresser and material handler with a three-year warranty
  • Unique frame design keeps tongue weight consistent with shifting loads and provides greater clearance for attachments. No need to lift rear of unit to transport around the property keeping center of gravity low for consistent stability.
  • Self cleaning hopper keeps wide range of products flowing.
  • Simple, rugged design gives years of maintenance free operation
  • Heavy duty Galvanized hopper minimizes rusting, eliminates paint flakes in topdressing
  • Rear mounted cross conveyor with 180 degree swivel gives easy access to tight areas and allows operator to evenly spread around material without moving machine.
  • Dual-beam suspension provides lower center of gravity for maximum stability.
  • "Fast Attach" system requires no tools when connecting attachments.
  • Large, 4-cubic-yard self-cleaning galvanized hopper can be unloaded in less than 30 seconds.
  • The rear of the CR-10 raises up to 6 ft for quick loading of topdressers, turf vehicles and spreaders.
  • Low profile and light PSI let you easily move large volumes of material.
  • Spinners allow you to set the type of application you want—from very light to medium or heavy— and broadcast width from 20 ft to 40 ft.

What you can get done with your CR-10

  • Rebuild tees
  • Fill irrigation trenches
  • Maintain & renovate cart paths
  • Topdress fairways
  • Fix washout areas
  • Renovate bunkers
  • Load topdressers
  • Fill bunkers
  • Topdress driving ranges
  • Update flowerbeds
  • Transfer material to hard-to-reach places
  • Clean up after storms
  • Back-fill drainage trenches
  • Renovate greens
  • Compost material
Model: CR-10; product number 85441
Hopper Capacity: 4 cubic-yards (3.06 cubic meters), galvanized panels
Transport Speed: Up to 15 mph (24 km/h) empty 8 mph
(12.8 km/h) loaded; topdressing 6 mph (9.6 km/h)
Conveyor Belt: 32" (0.81 m) wide, pebble surface composition with
heavy duty polyester cord.
Metering Gate: Full manual adjustment with the ability to fully open
entire rear hopper panel.
Controls: 3-position switch independently operates belt and
attachments. Adjustable flow control sets speed of
attachments. Adjustable twin spinner setsangle
for
broadcast topdressing.
Drive: Tractor’s hydraulic system powers belt and attachments.
Wheels: Four 31" x 15.5"-15" turf tires
Hitch: Heavy-duty pin hitch
Tractor Requirements: Minimum of 35 HP (26 kW) with one bank of hydraulics
and 9 GP M.
Empty Weight: 3,600 lbs. (1630 kg)
Dimensions: 185" (4.7 m) x 84" (2.13 m) wide x 86" (2.18 m) tall
Optional: • Surge brakes on two wheels (product number 85440)
• Material handler conveyor (product number 86147)
• Swivel (product number 86149)
• Spinners for topdressing 20' (6.10 m) to 40'
(12.19 m) wide (product number 86174)
Swivel Swivel
Product #86149
Material handler conveyor Material handler conveyor
Product #86147
Surge brakes on two wheels Surge brakes on two wheels
Product #85440
Spinners for topdressing 20' Spinners for topdressing 20'
Product #86174
(6.10 m) to 40' (12.19 m) wide

“Before we had the CR-10, it took all day to topdress our greens. Now, we can do half the greens with one CR-10 load and finish the whole job in about half the time.”

Mike Rienzi, Superintendent
Kiva Dunes Golf Course, Gulf Shores, AL

 

“I can't understand why all the major clubs don't have this piece of equipment in their shed. It's such a versatile piece of equipment.”

Duncan Kelso, Course Manager
Kings Hill Golf Club at West Mailling, Kent, United Kingdom