1-800-679-8201

SPECIFICATIONS

Model:

Mete-R-Matic® XL; product number 85460

Drive:

Wheels are driven by the ground, two tires mechanically drive the conveyor and brush, no engine, no hydraulic system

Hopper Capacity:

60.75 cubic feet (1.72 cubic meters; 2.25 cubic yards)

Payload:

6,000 lbs (2,721 kg)

Hopper Size:

80" x 65.5" at top, tapering to
60" x 46" at bottom,18.5" deep

Spreading Width:

60" (1.5m)

Top Dressing Speed:

Up to 8 mph (12.8 km/h) when loaded

Brush:

9" dia. (228 mm) polypropylene bristle

Metering Gate:

Taintor Gate Design is easily adjusted and provides a uniform opening up to 2-1/4" (57 mm).

Controls:

Electrically operated clutch for conveyor and brush drive. Metering gate adjusted by hand.

Wheels:

Two, 33 x 15.50 - 16.5 flotation tires

Hitch:

Adjustable height clevis 1" pin hitch

Electrical Requirements:

12 volt DC, negative ground, electrical power provided by tow vehicle

Empty Weight:

2,110 Ibs. (957 kg) Tow Vehicle Minimum 30
HP tractor (refer to Operator's Manual for additional requirements)
Specifications subject to change without notice

 
Mete-R-Matic® XL

Tow Type Top Dresser


The ultimate in large area and sports turf top dressing

The Mete-R-Matic, Turfco’s well-known top dressing brand, has been known for its uniform application of top dressing and its simple, easy-to-use design. And now Turfco proudly introduces the Mete-R-Matic XL topdresser with an extra-large capacity hopper.

At 60.75 cubic feet, the hopper capacity of the Mete-R-Matic XL is three times the size of the Mete-R-Matic III, for less reloading and increased efficiency on large turf areas.
  • Requires fewer trips to load material.

  • Like the Mete-R-Matic III, it can be loaded with a front-end loader.

  • Great for sports turf, fairways, approaches and other larger areas.

  • Patented chevron belt ensures uniform application with all types of
    material and moisture content. You can apply a wide variety of top
    dressing mixtures, sand, peat, humus; as well as calcine clay, crumb
    rubber, gypsum, and lime.

  • The combination of the chevron belt. Mete-R-Matic concept and the ground drive system ensures that each pass is uniform and consistent, eliminating the need for overlapping or redoing passes.
     
  • The ground drive system ensures that when you speed up or slow down. The conveyor belt and brush adjust at the same rate to provide even application regardless of varying speeds.

  • Because the Mete-R-Matics are ground driven, there are no hydraulics, pumps or engines. Hook- up is as simple as a pin hitch and there is no possibility of oil leaks to tell tale tracks on sports turf fields.
Ground drive system means no tow vehicle calibration required, just hook up and go.
Easy on/off switch.
Patented continuous Chevron belt ensures uniform application.
Perfect for applying calcine clay on infield.