Turfco Cross Conveyor

Designed to dramatically increase the multi-functional productivity of the WideSpin™ 1530 topdresser line, Turfco is now offering a Cross-Conveyor attachment that allows the machine to also be used for material handling duties.
 
The WideSpin 1530 is one of the most versatile topdressers and the new Cross-Conveyor attachment expands the model’s usefulness in course maintenance and renovation. When combined with the model’s large 21 cubic foot hopper, the Cross-Conveyor allows crews to utilize the WideSpin 1530 year-round in a variety of roles, from topping off bunkers, adding mulch to flowerbeds, leveling and repacking sprinkler heads, and more.
 
The design of the Cross-Conveyor attachment allows it to be quickly and easily deployed without tools, and it offers the convenience of a full 180-degrees rotation behind the machine.  When combined with Turfco’s patented three-position remote control switch, the Cross-Conveyor gives grounds crews unmatched flexibility in material placement.  When the job is finished, the Cross-Conveyor conveniently retracts out of the way, into the space between the wheels of the WideSpin 1530.
 

1-800-679-8201

SPECIFICATIONS

Product Number:

 Model 86172

Dimensions:

Width....28 Inches (0.71 Meter)
Height...27 Inches (0.69 Meter) (Bottom of Conveyor Frame to Top of Handle)

Length ....66-1/2” Inches (1.69 Meters) (Without Hoses)

Operating Reach:

55 Inches (1.4 Meter) (Measured From End of Cross Conveyor to
Center of Cross Conveyor Hopper)

Operating Swivel Angles:

0° to 180° Degrees.

Material Handling Rate:

Up to 8.1 Cubic Feet (0.3 Cubic Yards/0.23 Cubic Meters) Per Minute

Operating Ground Speed:

Stationary Use Only

Transport Speed:

Up to 9.6 Km/h (6 MPH) When Attached to the 1530 or 1530TM
(1530 Cross Conveyor Must Be Properly Stowed During Transport)

Operator Controls:

ON/OFF Operation Controlled by 1530 Hand Held ON/OFF Switch. Operating Speed Controlled By 1530 Spinner Speed Control, Operates In Conjunction With 1530 Conveyor Belt Speed Control and Metering Gate Handle. Locking Handles on Cross Conveyor For Swivel Indexing Control and Transport/Storage Position.

Hydraulic Drive:

Hydraulic Motor Driven Conveyor Belt. Hydraulic Power Provided by 1530 (or truck).

Conveyor Belt:

Patterned 7” Inches (178 mm) Wide PVC Composition.

Weight:

155 Pounds (70.3 Kg)

Maximum Operating Angle
of 1530and Conveyor Attachment
During Transport and Stationary
Operation

15º Degrees

 

 Specifications subject to change without notice